Skip to content
Neu: MS Parts Klick-Kennzeichenhalter, rahmenlos ab CHF 24.90 →
Neu: Klick-Kennzeichenhalter ab CHF 24.90 →

Velcro License Plate Holder Switzerland - Frameless, No Drilling | MS Parts

CHF 39.00
Delivery time: 1 bis 3 Tage
Question about this product? Ask via WhatsApp

Short Description:

For all who want to present their vehicle without visible license plate frames. The MS Parts hook-and-loop license plate holder ensures a clean, tidy look and holds reliably in everyday use.

The system is based on a high-quality industrial hook-and-loop fastener specially developed for use on vehicles. Whether on the highway, in the car wash, or in changing weather conditions, the hold remains constant.

Installation is simple and requires no drilling. At the same time, the holder can be removed again if necessary, without damaging the vehicle.

Brand:

MS Parts

Kein Zertifikat Erforderlich
  • Kein Zertifikat Erforderlich

Menge wählen

−20 %

✔ Very easy to mount
✔ Extremely clean look without sharp edges
✔ Temperature resistant from -30°C to +95°C
✔ Car wash proof
✔ UV and weather resistant
✔ Extremely firm hold
✔ Only removable with a card (included in the Premium Set)
✔ Durable
✔ Suitable for all vehicles
✔ No visible advertising

Ohne Bohren und ohne Schrauben
Rückstandslos wieder entfernbar
Für CH-Langformat inkl. FL
Ab Lager, 1 bis 3 Tage
MS Parts Klettstreifen auf der Karosserie
Montage

In drei Schritten montiert

01Flächen reinigenKarosserie und Schildrückseite fett- und silikonfrei reinigen und trocken reiben. Bei neuen Schildern die Rückseite kurz anschleifen.
02Klett aufklebenStreifen mit MS Parts Einstanzung aufs Fahrzeug, Streifen ohne Logo auf die Schildrückseite.
03Schild andrückenSchild fest andrücken. Die ersten 24 Stunden nicht in die Waschanlage, damit der Kleber aushärtet.

Klett, Klick oder Werberahmen?

Rahmenlos sind beide MS Parts Halter. Der Unterschied liegt in der Befestigung.

MS Parts Klett MS Parts Klick Werberahmen
OptikRahmenlos, gar keine Halterung sichtbarRahmenlos, vier schmale HalterBreiter Rahmen, meist mit Fremdwerbung
BefestigungKlettband direkt auf der KarosserieBestehende SchraubpunkteBestehende Schraubpunkte
BohrenNeinNeinNein
SchildwechselSchild abziehen und wieder andrückenIn Sekunden, ohne WerkzeugSchrauben lösen
Passt gut beiEbener, glatter Fläche ohne KennzeichenmuldeWechselschildern und häufigem Umstecken–
Preis CHF 39.00 CHF 24.90 –

Gut zu wissen

Die wichtigsten Angaben auf einen Blick, bevor du bestellst.

FormatSchweizer Langformat inkl. FL. Braucht eine ebene, glatte Fläche ohne Kennzeichenmulde.
Lieferumfang2× Klettstreifen Fahrzeug, 2× Klettstreifen Kennzeichen, 3× Reinigungstücher, 1× Trennkarte.
MaterialVollflächiger Klettverschluss aus 100 % Polyamid mit hitzebeständigem Harzkleber, entwickelt für Autolacke.
Rückgabe und Garantie14 Tage Rückgabe auf unbenutzte, originalverpackte Ware. Lebenslange Garantie auf Material- und Herstellungsfehler.

Unsicher, was zu deinem Fahrzeug passt?

Schick uns ein Foto von deiner Front oder deinem Heck. Wir sagen dir, welcher Halter passt, und ob du vorne eine Montageplatte brauchst.

Before & After

Drag the slider to see the transformation

Beforehand Afterwards

Frequently Asked Questions

Do I need to drill or screw to attach the license plate?


No, the MS Parts hook-and-loop system was specially developed for frameless installation without drilling or screws. Thanks to the self-adhesive high-performance hook-and-loop tape, attachment is completed in just a few minutes.

Is the product suitable for car washes?

Yes, the MS Parts Velcro license plate holder set is completely car wash proof, UV and weather resistant, and temperature resistant from -30°C to +95°C.

How many vehicles does one set cover?

One set is sufficient for exactly one vehicle – meaning for both the front and the back. For multiple vehicles, you will need multiple sets accordingly.

Does the hook and loop tape leave residue on my vehicle?

No, the system is designed for residue-free removal. This makes it ideal for leased vehicles or if you frequently want to switch the license plate between different vehicles.

Meine Front hat vorne nur ein Gitter, was jetzt?

Der Klett braucht eine ebene Fläche. Fehlt sie, schafft unsere Montageplatte Fahrzeugfront diese Fläche am Kühlergrill. Schreib uns im Zweifel kurz per WhatsApp.